Super Efficient Electric and Insulated Freedom Drinkers
These one-piece, heavily insulated fountains are all polyrust and corrosion free. Thick styrofoam floor keeps the frost line below the drinker. Urethane insulation in the walls is over four times the insulation found in competitor’s models. Tested to -20° F.
The plastic used in all Behlen Country™ units is FDA approved, food grade, recyclable, polyethylene plastic. It is impact resistant, UV stabilized, and light weight yet strong.
These state-of-the-art drinkers feature an all new low wattage, infra-red heat pad, placed directly under the water trough. These pads produce more heat, using less than 1/4 of the electricity of 500 watt heaters (115 Volt, UL approved). The double insulated design eliminates the possibility of stray voltage that can be a problem in metal drinkers. Heat pads are totally isolated from the the animal to prevent danger from shock.
Units have non-siphoning water valve, built-in hold downs, removable drain plugs and easily accessible doors.
Fully assembled, ready to install.
NOTE: Models ASW, PCHI, PCSI and PCPI are non-electric and for use in climates above freezing.
The Automatic Stall Waterer (ASW and ASW-H), is designed for placement in a stall. An automatic fill valve assures fresh water at all times. Rounded corners for animal safety. Drinker height can be adjusted from 40” to as low as 18” by cutting the bottom of the pedestal off to the desired height. The ASW-H has a 100 watt super efficient infrared heat pad.
The Companion/Horse (PCHI and PCHE) drinkers are made especially for horses, exotic pets or small farm animals. Features include rounded edges for animal safety, a large access panel for hookup and maintenance, molded in hold downs, thick insulation and a deep 8” bowl which holds 5.5 gallons. The PCHE is electric and uses a 75 watt super efficient infrared heating pad which is thermostatically controlled.
